Flat Belt Driven Live Roller Conveyor

Bed - 7" x 1 1/2" x 12 gauge powder painted formed steel channel frame, bolted together with butt couplings and floor supports.
Tread rollers - 1.9" diameter x 16 gauge galvanized steel rollers spaced on 2 1/4", 3", 4 1/2" or 6" centers. Safety pop-out design prevents damage to product or harm to personnel if caught between belt and tread rollers.
Pressure rollers - 1.9" diameter x 16 gauge galvanized steel rolled spaced on 6:, 9",= or 12: centers, cam adjusted.
X-bracing - Frame squaring device supplied on conveyors 40 feet and longer on every other bed section. X-bracing insures good product and belt tracking.
Tail pulley - 4" diameter crowned with 1 3/16" shaft.
Snub roller - 2 1/2" diameter adjustable, located directly behind drive pulley. 2" diameter at each end directly behind terminal pulleys.
Return idlers - 1.9" diameter adjustable on 10' 0" centers.
Floor supports - 31 1/2" to 45 1/2" adjustable from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
Take-Up - Located in center drive, provides 24" of belt take-up.
Bearings - Sealed and pre-lubricated with cast iron housings.
Speed reducer - C-face mounted heavy duty worm gear reducer.