Sprocket & Tire Driven Accumulation Conveyor
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Description
The A/C250 accumulation conveyor incorporates chain driven urethane traction wheels with molded Delrin sprocket to drive carrying rollers. It offers true zero-pressure accumulation and versatility - controlled discharge zones, optional release modes, and dual sensor arrangements.
Features
True zero-pressure accumulation.
No fine tuning required.
3" carrying roller spacing.
30" long accumulation zones.
Pre-engineered and assembled.
Low maintenance.
Self adjusting elements.
Powder coat finish.
Optional power take-off (pto) to slave drive t/c250 curves and junctions.
Optional light load sensors.
Specifications and Data
Frame - 5-1/2" x 1-1/4" x 10 gauge formed steel channel. Powder coat grey finish.
Carrying Rollers - 1.9" diameter x 16 gauge, galvanized rollers on 3" centers.
Sensor Rollers - Aluminum rollers with grease packed bearings, pivotally mounted at 30" centers.
Clutch - Precision molded sprocket and urethane tread mounted on channel frame, four in each accumulation zone.
Drive Chain - No. 40 roller chain.
Bed Widths - 16", 22", 28", 34", and 40" between frames.
Bed Lengths - Available from 12'-0" minimum to 150'-0" maximum in 30" increments.
Capacity - 100 pounds per foot.
Drive - End type located at discharge end of conveyor with automatic chain tensioner. Sprocket keyed to 1-7/16" diameter
Steel shaft mounted in grease packed-for-life bearings.
Take-Up - Manually adjustable screw type at infeed end.
Power Unit - From 1/3 to 3 HP TEFC, C-FACE motor/reducer units. Side mounted units available for low elevation.
Speeds - 45, 60, 75, 90, 120, 150, and 180 feet per minute.
Power Take-Off Units - Chain drive components (1:1 speed ratio) and end terminal connection to adjoining "upstream" powered belt, A/C, and T/C conveyors.
Operating Air Pressure - 5-10 PSI. An air filter/regulator is furnished with each conveyor.
Operational Release Modes - Singulation, Slug, and Auto-Slug.
Features
True zero-pressure accumulation.
No fine tuning required.
3" carrying roller spacing.
30" long accumulation zones.
Pre-engineered and assembled.
Low maintenance.
Self adjusting elements.
Powder coat finish.
Optional power take-off (pto) to slave drive t/c250 curves and junctions.
Optional light load sensors.
Specifications and Data
Frame - 5-1/2" x 1-1/4" x 10 gauge formed steel channel. Powder coat grey finish.
Carrying Rollers - 1.9" diameter x 16 gauge, galvanized rollers on 3" centers.
Sensor Rollers - Aluminum rollers with grease packed bearings, pivotally mounted at 30" centers.
Clutch - Precision molded sprocket and urethane tread mounted on channel frame, four in each accumulation zone.
Drive Chain - No. 40 roller chain.
Bed Widths - 16", 22", 28", 34", and 40" between frames.
Bed Lengths - Available from 12'-0" minimum to 150'-0" maximum in 30" increments.
Capacity - 100 pounds per foot.
Drive - End type located at discharge end of conveyor with automatic chain tensioner. Sprocket keyed to 1-7/16" diameter
Steel shaft mounted in grease packed-for-life bearings.
Take-Up - Manually adjustable screw type at infeed end.
Power Unit - From 1/3 to 3 HP TEFC, C-FACE motor/reducer units. Side mounted units available for low elevation.
Speeds - 45, 60, 75, 90, 120, 150, and 180 feet per minute.
Power Take-Off Units - Chain drive components (1:1 speed ratio) and end terminal connection to adjoining "upstream" powered belt, A/C, and T/C conveyors.
Operating Air Pressure - 5-10 PSI. An air filter/regulator is furnished with each conveyor.
Operational Release Modes - Singulation, Slug, and Auto-Slug.
Contact the seller
Sprocket & Tire Driven Accumulation Conveyor
We recommend to see